Installing The 1.8 Inch Usata Ssd Backplane; Internal Usb Memory Key (Optional); Replacing The Internal Usb Key - Dell PowerEdge C4130 Owner's Manual

Hide thumbs Also See for PowerEdge C4130:
Table of Contents

Advertisement

5.
SSD cage

Installing the 1.8 inch uSATA SSD backplane

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you read the
2.
Follow the procedure listed in
3.
Remove the 1.8 inch SSD cage. For more information, see
NOTE: The 1.8 inch SSD backplane is installed on the back of the 1.8 inch SSD cage.
Steps
1.
Slide the SSD backplane into the slot on the SSD cage.
2.
Align the screw hole on the SSD backplane with the screw hole on the SSD cage.
3.
Secure the SSD backplane to the SSD cage by using the screw.
Next steps
1.
Install the SSD cage.
2.
Follow the procedure listed in
Related Links
Installing the 1.8 inch uSATA SSD cage

Internal USB memory key (optional)

The USB memory key installed inside your system can be used as a boot device, security key, or mass
storage device.
To boot from the USB memory key, configure the USB memory key with a boot image and then specify
the USB memory key in the boot sequence in System Setup.
The internal USB connector is located on the system board.

Replacing the internal USB key

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you read the
2.
The USB connector must be enabled by the Internal USB Port option in the Integrated Devices
screen of System Setup.
Safety
instructions.
Before working inside your
After working inside your
Safety
instructions.
system.
Removing the 1.8 inch uSATA SSD
system.
cage.
99

Advertisement

Table of Contents
loading

Table of Contents