Installing The Optional 2.5 Inch Hard Drive Cage Cover - Dell PowerEdge C4130 Owner's Manual

4. Keep the Phillips #1 screwdriver ready.
Steps
1. Remove the screws securing the hard drive cage cover to the hard drive cage.
2. Slide the hard drive cage cover toward the front of the hard drive cage to disengage it from the slots
on the hard drive cage.
3. Lift the hard drive cage cover away from the hard drive cage.
Figure 31. Removing and installing the 2.5 inch hard drive cage cover
1. slot on the hard drive cage (2)
3. hard drive cage cover
Next steps
Depending on your requirement, install or remove the 2.5 inch hard drive(s).
Related Links
Installing a 2.5 inch cabled hard drive into the hard drive cage
Removing 2.5 inch cabled hard drives from the hard drive cage

Installing the optional 2.5 inch hard drive cage cover

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the hard drive cage. See
4. If applicable, install the 2.5 inch hard drive(s) into the hard drive cage. See
hard drive into the hard drive
Safety instructions.
Before working inside your
Removing the optional 2.5 inch hard drive
cage.
2. hard drive cage
4. screw (2)
system.
cage.
Installing a 2.5 inch cabled
85