Installing A Cooling Fan - Dell PowerEdge C4130 Owner's Manual

Figure 46. Removing and installing a cooling fan
1. cooling fan (8)
3. cooling fan connector on system board
Next steps
1. Install the cooling fan.

Installing a cooling fan

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the system top cover (front). For more information, see
(front).
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1. Hold the cooling fan by the sides with the cable end facing the system board.
2. Align the cooling fan with the slot on the chassis and slide the fan into the slot.
Safety instructions.
Before working inside your
2. cooling fan power cable
4. cooling fan slot
system.
Removing the system top cover
111