Removing A Gpu - Dell PowerEdge C4130 Owner's Manual

Next steps
Remove the GPU.
Related Links

Removing a GPU

Removing a GPU
To remove GPU 2, remove GPU 1 first and to remove GPU 4, remove GPU 3 first.
Prerequisites
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be
performed only by Dell certified service technicians.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Remove the GPU riser cables connected to the switch board or system board.
CAUTION: The GPU riser cables should be removed before removing the GPUs to prevent
pin damage in the GPU connectors on the system board.
3. Disconnect the power cables connected to the system board.
Steps
1. Hold the GPU by the support brackets, and lift the GPU at an angle to release it from the guide pins
on the front inner wall of the chassis.
NOTE: Do not hold the GPU by the GPU riser cable board while removing the GPU.
2. Lift the GPU out of the chassis.
3. Disconnect the power cable connected to the GPU.
Safety instructions.
115