Removing An Ac Power Supply Unit - Dell PowerEdge C4130 Owner's Manual

Steps
Align the power supply unit blank with the power supply unit slot and push it into the power supply
unit slot until it clicks into place.

Removing an AC power supply unit

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: The system requires one power supply unit (PSU) for normal operation. On power-
redundant systems, remove and install only one PSU at a time in a system that is powered on.
1. Ensure that you read the
2. Disconnect the power cable from the power source and from the PSU you intend to remove.
3. Remove the cables from the strap on the PSU.
Steps
Press the release latch and slide the PSU out of the PSU slot by holding the PSU handle.
Figure 29. Removing and installing an AC PSU
1. release latch
3. PSU
Safety instructions.
2. PSU power cable connector
4. PSU connector
81