Assembling The Fork Legs - KTM 350 EXC-F EU Repair Manual

6 FORK, TRIPLE CLAMP
6.12.8

Assembling the fork legs

Info
The steps are identical for both fork legs.
Info
The side with the largest inside diameter faces downward.
–
Mount shim stack
Info
Align the triangular plate exactly with the piston opening.
–
Mount and tighten nut
Guideline
Tap rebound nut
200720-10
Info
Mount the nut with the collar facing downward.
–
Secure the nut by locking.
–
Degrease the cartridge and clamp using the special tool.
Clamping stand (T14015S) (
–
Mount and tighten screwsleeve
Guideline
Screwsleeve
200749-11
–
Mount washer
200748-11
–
Push piston rod
200747-11
–
Screw on fluid barrier
Info
The fluid barrier must be screwed on tightly against the stop. Do not use a
tool.
200746-11
 .

.
p. 352)

.
M29x1
 
and spring seat .
 into the cartridge.

to the stop.
M6x0.5 5 Nm (3.7 lbf ft)
46 Nm Loctite
(33.9 lbf ft)
27
® 241