Engine Assembly; Installing The Crankshaft - KTM 350 EXC-F EU Repair Manual

18 ENGINE
Main work
–
Fix the countershaft in the vice with the toothed end facing downward.
Guideline
Use soft jaws
–

Mount needle bearing
–
Mount 2nd-gear idler gear
–

Mount stop disk and lock ring
–
Mount 5th-gear sliding gear
–

Mount lock ring and stop disk
–

Mount needle bearing
–
Mount 4th-gear idler gear
–
Mount needle bearing 
–
Mount 3rd-gear idler gear
–

Mount lock ring and stop disk
–
Mount 6th-gear sliding gear
–
Mount stop disk  .
–

Mount needle bearing
–
Mount 1st-gear idler gear
–

Mount stop disk .
–
Finally, check all gear wheels for smooth operation.
18.5

Engine assembly

18.5.1

Installing the crankshaft

.

.

.
 with the shift groove facing up.

.
.

.
.

.

.

with the shift groove facing downward.
.

.
–
Position the right section of the engine case in the engine work stand.
–
Oil the bearing.
Engine oil (SAE 10W/50) (
–
Push crankshaft
308656-10
305012-11
p. 338)

into the bearing seat.
182