Samsung DCS 400SI User Manual page 55

Hide thumbs Also See for DCS 400SI:
Table of Contents

Advertisement

MUTE MICROPHONE/HANDSET
Any keyset user can mute the keyset's handset transmitter by pressing the MUTE
key. In addition, keyset users can also mute the keyset microphone while the keyset
is in speakerphone mode.
OFF-HOOK RINGING
When a keyset is in use, the system will provide an off-hook ring signal to indicate
that another call is waiting. The ring signal is a single ring repeated. The interval is
controlled by a system-wide timer. Single line stations will receive a tone burst
through the handset receiver instead of a ring.
OFF-HOOK VOICE ANNOUNCE (STANDARD)
Keysets may receive a voice announcement while on another call. The calling sta-
tion must have an OHVA key. When transferring a call to a busy keyset or while
listening to busy signal, the station user can press the OHVA key to make an OHVA
call to the busy keyset. If the called keyset is in the DND mode, it cannot receive
OHVA calls.
OFF-HOOK VOICE ANNOUNCE (EXECUTIVE)
A keyset associated with an add-on module (AOM) may receive an executive off-
hook voice announcement while on another call. The called keyset user may reply
handsfree without interrupting the call in progress. Only keysets with an off-hook
voice announce button (OHVA) can off-hook voice announce to keysets with AOMs.
ONE TIME DO NOT DISTURB
The Do Not Disturb (One Time) feature is used to stop all calls to a station when the
user is on an outside line and does not want to be disturbed for the duration of the
call. Upon completion of the call, DND is canceled and the station is returned to
normal service. This feature requires a programmed button.
ONE TOUCH DIALING KEYS
Frequently used speed numbers can be assigned to one touch dialing keys for fast
accurate dialing.
ON-HOOK DIALING
Any keyset user can originate calls without lifting the handset. When the called
party answers, the user may speak into the microphone or lift the handset for more
privacy.
PRIVACY RELEASE
This feature will allow another station to join in on your conversation by temporarily
releasing privacy on the C.O. line from your keyset.
Requires a Privacy Release key to be programmed on your keyset. A maximum of
three (3) other people can join in. This uses one of the conference circuits in the
system.
4.2.5
CONTENTS

Advertisement

Table of Contents
loading

Table of Contents