Table of Contents
Advertisement
sults in an Auto Answer intercom call being made to the BOSS (providing the BOSS
is free). A station can only be the BOSS of one SECRETARY pool. In addition, a
station cannot be in more than one pool.
EXTERNAL MUSIC INTERFACES
The 400si provides an interface for connecting a customer-provided external mu-
sic source. Additional two sources can be provided with additional hardware. These
sources can be used for background music, station music on hold, trunk music on
hold and transfer music on hold.
EXTERNAL PAGE INTERFACES
The DCS 400si common control card (DCCP) provides one external page output
and two zone control relays. Resources from an added miscellaneous applications
card (DMAP1) can be combined to provide two external zones. Multiple relays may
be assigned to each zone.
FLASH KEY OPERATION
While a user is on an outside line, pressing the FLASH key will flash the central
office or PBX. This is used for custom calling features on C.O. lines or in conjunc-
tion with CENTREX/PBX operation. System programming allows individual flash
times for C.O. and PBX lines. When C.O. or PBX flash is not required, setting the
timers for two seconds releases the existing call and returns dial tone to make a
new call.
FLEXIBLE NUMBERING
System programming allows stations to have two, three or four digit extension num-
bers beginning with the digit 2 or 3. Three digit default extension numbers begin
with 201 and four digit defaults begin with 2001. Station group numbers can be
three or four digits beginning with the digit 5.
Using digits other than 2, 3 or 5 will require the technician to change other feature
access codes in the system default numbering plan. User guides will need to be
modified as these are all written using the 400si default numbering plan.
GROUND START TRUNKS (T1/COPPER)
The 400si can utilize these trunks to support a positive disconnect signal and pre-
vent call collisions on heavy traffic usage. Caller ID or ANI service is not available
on these trunks.
HOT LINE
Stations can be programmed to call a pre-defined station or station group when-
ever that station goes off-hook. A hot line delay timer of 1–250 seconds can be
programmed to allow sufficient time to make a different call.
IN GROUP/OUT OF GROUP
Individuals assigned to a station hunt group may temporarily remove their tele-
phones from the group by pressing the In/Out of Group button providing that there
4.1.13
CONTENTS
Advertisement
Table of Contents
