Table of Contents
Advertisement
LEAST COST ROUTING
Least Cost Routing (LCR) is the ability to automatically select the most cost effec-
tive central office route for the outside number dialed by any station. The DCS
400si LCR program includes the following features:
• Option to use or not use LCR on a tenant basis
• Programmable LCR access code
• Digit analysis table 3000 entries each with ten digits
• Routing by time of day and day of week (4 time bands per day)
• Routing according to individual station class
• Modify digits table 500 entries
• Flexible trunk group advance timer
• Option to use or not use trunk group advance warning tones
LIVE SYSTEM PROGRAMMING
The system can be programmed from any display keyset or personal computer
without interrupting normal system operation. There are three levels of program-
ming: technician, customer and station. The technician level has access to all pro-
grams and can allow the customer access to system programs as needed. Techni-
cian and customer access are controlled by different security passcodes. Program-
ming from a PC requires the PCMMC program.
MEET ME PAGE AND ANSWER
After a user makes a Meet Me Page, the user may remain off-hook to allow the
paged party to meet the user for a private conversation.
MEMORY PROTECTION
In the event that power is lost to the system, all customer data contained in memory
is retained by the use of a lithium battery for approximately one year. In addition,
the PCMMC computer program may be used to produce a backup copy of the
customer data. Additionally, an optional DCDM daughterboard may be used to
store the system database.
MESSAGE WAITING INDICATIONS
When calling a station and receiving a busy signal or the no answer condition, the
caller can leave an indication that a message is waiting. The message button will
flash red at the messaged keyset. A single line phone can receive a distinctive
message waiting dial tone or a message lamp indication. Five message waiting
indications can be left at any station.
MICROPHONE ON/OFF PER STATION
The microphone can be disabled at any keyset. When the microphone is disabled,
the keyset cannot use the speakerphone, although on-hook dialing and group lis-
tening are still possible.
4.1.15
CONTENTS
Advertisement
Table of Contents
