Advertisement
File No.
960-010
3.18
SEEK TO LANDING ZONE (HOD)
3.18.1 Program description
When moving the unit, if an HOD head hits a data area severely,
the data will be lost.
In order to protect the data, this
program moves HOD heads to safe areas.
These areas called
"landing zone".
NOTE:
The built-in hard disk drive controls automatically the
heads to move to the landing zone at power down.
3.18.2 Operations
1.
After pressing 3 and Enter in the DIAGNOSTICS MENU, the
program is automatically executed and the following message will
appear.
Landing seek completed.
(HOD#1)
Press [Enter] key.
2.
After pressing Enter, the DIAGNOSTICS MENU appears.
3-35
Advertisement
