Advertisement
File No.
960-010
6.
During the hard disk test, the message shown below will
appear. The ADDRESS number indicates that the first XXX
shows a cylinder number, the fourth X shows a head number,
and the last XX shows a sector number. The STATUS number
indicates that the first X shows a drive number and the last
XX shows an error status code.
HARD DISK TEST
xxxxxxx
SUB-TEST
PASS COUNT
WRITE DATA
ADDRESS
XX
xxxxx
XX
xxxxxx
ERROR COUNT
READ DATA
STATUS
xxxxx
XX
XXX
CONTENTS
Subtest 01
Subtest 02
Subtest 03
Sequential read
This subtest performs forward reading of contents
from track 0 to Max. track and then performs
reverse reading of the contents from Max. track to
track O.
Address uniqueness
1.
Selecting this subtest, the following message
will appear.
Read sequential select
?
1
Forward sequential
2
Reverse sequential
3
Random
2.
Select one of the above and press the Enter.
This subtest writes the address data that is
different sector by sector at each track, then
reads and compares it to the original data.
This test is done for all tracks.
Random address/data
This subtest writes random data to random
addresses (cylinder, head, sector) and then reads
the data out and compares it to the original data.
3-23
Advertisement
