Advertisement
File No.
960-010
3.13
NDP TEST
CAUTION:
This test cannot be run if there is no NDP mounted
on the system BOARD.
Subtest 01
NDP test
This subtest checks the control word, status word,
bus, and addition/multiplication functions.
3.14
EXPANSION UNIT TEST
NOTE:
If there is no expansion unit connected to the system,
this test
cannot be executed.
Subtest 01
Subtest 02
Subtest 03
Box wrap around
(8 bits bus)
NOTE:
As this subtest required a special tool to
be executed, it cannot be carried out here.
Box mono video RAM
NOTE:
If there is no monochrome display card in
the expansion unit, this test cannot be executed.
This subtest writes data (FF, AA, 55; OOH) into
the monochrome display memory (BOOOOH to BOF9FH),
then reads the data out and compares it with the
original data.
Wrap around test (16 bit bus)
NOTE:
As this subtest requires a special tool to
be executed, it cannot be carried out here.
If you execute the this subtest, the expansion
memory not connect to the system board.
3-26
Advertisement
