Display And Button Brightness; Iris (Joystick) Setup; Clock; Default Values - GRASS VALLEY OCP 400 User Manual

3.3.4 Display and button brightness

The text brightness and contrast of the display and the brightness of the low and high levels of
the button lights can be set in the OCP setup menu. Select the item you wish to change and
then use the assignable rotary control to adjust its value.

3.3.5 Iris (joystick) setup

The range over which the iris opening can be controlled by the joystick and its sensitivity are
set in the Iris submenu of the OCP Setup menu. The direction of control can also be set in the
IRIS submenu.
Menu
Iris setup

3.3.6 Clock

The time for the internal clock is set in the CLOCK submenu of the OCP setup menu. The
assignable rotary control is used to set the hours, minutes and seconds.
Menu
Clock
page 1
Clock
page 2

3.3.7 Default values

The default values of the OCP are stored in the OCP and are restored when the Reset OCP
item is selected. When the OCP is powered up or reset, a connection to the last camera
number used is made.
The default values for the camera and XCU/Base Station parameters are stored in the camera
and XCU/Base Station default files. The camera parameters and their values that are shown on
the OCP depend on the camera connected to OCP . If you select a different camera number, a
different set of parameters and values can appear.
24
Selections Function
Iris Mode Select Iris joystick mode
Range Set Iris joystick control range
Center Set Iris joystick control center
IRIS CAL Calibrate joystick
Selections Function
Hour Hour selection function
Minute Minute selection function
Second Second selection function
-
Year Year selection function
Month Month selection function
Day Day selection function
-
Level Possible values
S Normal, Reverse
S 0..99
S 0..99
S Move the joystick to the most
upper and lower position.
Level Possible values
F 0..23
F 0..59
F 0..59
F 2000..2099
F <months>
F 0..31
OCP 400 Operational Control Panel User's Guide (v12.0)
Chapter 3 - Setup