Setting Up The Xcu/Base Station; Accessing The Xcu/Base Station Menu - GRASS VALLEY OCP 400 User Manual

3.4 Setting up the XCU/Base Station

– Push the SETUP button to open the menu.
– Push the SELECTION button to choose the BS submenu. The BS menu appears. Use
Menu
BS setup
page 1
BS setup
page 2
BS setup
page 3

3.4.1 Accessing the XCU/Base Station menu

Select the MENU item of the BS menu to access the internal menu of the XCU/Base Station.
The menu appears on the XCU/Base Station text and monitoring output.
Menu
BS menu
control
OCP 400 Operational Control Panel User's Guide (v12.0)
the NEXT button to view subsequent pages.
Selections Function
Monitoring Monitoring output selection
-
-
MENU Go to BS menu control
H Phase Adjustment H-Phase
SC Coarse Adjustment SC-Phase coarse
-
SC Fine Adjustment SC-Phase fine
Notch Lvl Notch Depth
Notch Notch function
-
-
Selections Function
Up Navigate 'up' in the BS menu
-
Down Navigate 'down' in the BS menu S
Select Activate 'select' in the BS menu S
Chapter 3 - Setup
Level Possible values
S CVBS,R,G,B,Y,EXT1,EXT2,Y/
EXT1,Y/EXT2
S
B 0..99
B 0,90,180,270
B 0..99
B 0..99
B On, Off
Level Possible values
S
25