Use Of Color; Standard Button Display - GRASS VALLEY JUPITER L - V2.1.0 Instruction Manual

Section 7 — LCD Introduction

Use of Color

Standard Button Display

Line #2
146
The LCD panel buttons have color capabilities (green, yellow, red, and
amber in varying intensities). Color displays are available on all LCD
panels and can display up to 3 lines of 10 characters. Specifically, the
buttons use color to indicate the following functionality:
Table 5. Colors and Functions for LCD Buttons
Button Color Function
Green Indicates the Source.
Yellow Indicates a Destination.
Blue Indicates an Override.
White Indicates a selection for action.
Pink Indicates a Sequence.
Magenta Indicates that a Destination is protected.
Red Indicates that a Destination is locked.
Lt. Blue Indicates a Category type selection.
Amber Indicates Levels.
Each button can show text on three different lines. The image below shows
an example of the information that is displayed for the three lines. The
image is for the LCD16 Control panel but the information is the same for
the LCD48.
Figure 81. Three-Lines Displayed
JUPITER L-S and LCD Series Control Panel Instruction Manual
Line #1l
MISC
Source name
Destination
Line #3