Button Definitions; Button Specification - GRASS VALLEY NV9605 User Manual

Table of Contents

Configuration

Button Definitions

There are three classes of button functions:

• Dedicated functions, such as 'Default State' or 'Chop' .

• Variable functions, such as 'Source' or 'Destination' .

• Special functions, such as 'Menu' and 'Salvo' .

Note:

During configuration, certain button fields contain a colon (:) and number after the

data in the field. The number is the record ID of the object in the NV9000 configuration

database. The record IDs can be ignored but might be of some use when the configurer

is searching for items in the configuration database.

The button definition section configures the button you have selected in the image of the

NV9605:

When you choose a button type, additional drop-down menus can appear, depending on

the button type, allowing you to further specify the button's behavior. Available options

and selections vary from button type to button type.

Certain button types are not available in each of the modes. The list that follows identifies

in which modes the buttons can apply. These letter codes represent the modes:

X — limited X-Y mode

M — multi-destination mode

Only a few button types are available for the 32 buttons to the left of the display. These are

designated with the letter code "L. "

Table of Contents