Non-Standard Indication - GRASS VALLEY OCP 400 User Manual

Menu
SD detail
page 1
SD detail
page 2
SD detail
page 3
Detail Equalizer
Camera systems that have parallel SD outputs, detail parameters have different values for the
High Definition (HD) output and the Standard Definition (SD) output. Press the NEXT button to
open the second (SD output) set of parameters.
Menu
SD detail
page 1
SD detail
page 2
SD detail
page 3

4.5.12 Non-standard indication

Normally if the menu of a function group is active, the button is illuminated high green. But in
the case that the function group is non-standard ánd the menu is active, the button will be
illuminated yellow (mix of orange and high-green).
When a button is illuminated as non-standard, it is possible to see which individual function or
functions is/are nonstandard. This is indicated with a *-symbol behind every non-standard
value in the menu.
OCP 400 Operational Control Panel User's Guide (v12.0)
Selections Function
SD DTL LVL Detail Level
SD DTL Funct Detail Function
SD LVL Dep Level Dependency
SD NoiseSL NoiseSlicer
SD V Detail Vertical detail level
SD C/Fine Detail fine adjustment
-
-
-
SD SOFT LVL Soft detail level
SD Soft DTL Soft detail function
SD Sourc Detail source Selection
Selections Function
SD DTL LVL Detail Level
SD DTL Funct Detail Function
SD LVL Dep Level Dependency
SD NoiseSL NoiseSlicer
SD V Detail Vertical detail level
SD C/Fine Detail fine adjustment
-
-
-
SD SOFT LVL Soft detail level
SD Soft DTL Soft detail function
SD Sourc Detail source Selection
Chapter 4 - Operation
Level Possible values
S SD 0..99
S SD On, SD Off
B SD 0..99
B SD 0..99
B SD 0..99
B SD 0..99
B SD 0..99
B SD On, SD Off
B SD Y,SD R,SD G,SD R+G
Level Possible values
S SD 0..99
S SD On, SD Off
B SD 0..99
B SD 0..99
B SD 0..99
B SD 0..99
B SD 0..99
B SD On, SD Off
B SD Y,SD R,SD G,SD R+G
51