Variable Matrix And Shading - GRASS VALLEY OCP 400 User Manual

3.5.1 Variable matrix and shading

The Variable Matrix and Shading menus are submenus of the camera setup menu.
Menu
Variable
Matrix
page 1
Variable
Matrix
page 2
Menu
Shading
page 1
Shading
page 2
Shading
page 3
Shading
page 4
28
Selections Function
G->R Sets the green to red ratio.
B->R Sets the blue to red ratio.
R->G Sets the red to green ratio.
B->G Sets the blue to green ratio.
R->B Sets the red to green ratio.
G->B Sets the green to blue ratio.
-
-
Selections Function
Shading Turns shading on or off
-
-
-
R-SAW H Sets the horizontal sawtooth
value (for red)
R-PAR H Sets the horizontal parameter
(for red)
R-SAW V Sets the vertical sawtooth value
(for red)
R-PAR V Sets the vertical parameter (for
red)
G-SAW H Sets the horizontal sawtooth
value (for green)
G-PAR H Sets the horizontal parameter
(vor green)
G-SAW V Sets the vertical sawtooth value
(for green)
G-PAR V Sets the vertical parameter (vor
green)
B-SAW H Sets the horizontal sawtooth
value (for blue)
B-PAR H Sets the horizontal parameter
(for blue)
B-SAW V Sets the vertical sawtooth value
(for blue)
B-PAR V Sets the vertical parameter (for
blue)
Level Possible values
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
Level Possible values
F On, Off
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
F 0..99 (50)
OCP 400 Operational Control Panel User's Guide (v12.0)
Chapter 3 - Setup