Green Formatter: Securing Screws; Formatter: Securing Screws (Simplified); Simplified Representation Of The Controls Of The Green Formatter; Convergence Controls Of The Green Channel - Barco Galaxy NH-12 Installation Manual

3.4.5.3

Convergence controls of the green channel

Securing screws
Prior to adjusting the position of the formatter, four securing screws must be released! The location of the screws can be seen in
the image below.
Image 3-82

Green formatter: securing screws

Representation of the controls
The drawing below explains how the simplified representation for the controls of the green formatter board was generated and how
it can be interpreted.
Image 3-84
Simplified representation of the controls of the green formatter
Functionality of the controls
Prior to adjusting (i.e. screwing clockwise) any of the controls (1A, 1B, 2A, 2B, 3A or 3B), the adjacent control (e.g. 1B is adjacent
to 1A) must be released a bit (i.e. screwed counterclockwise).
R59770591 ENGINE KIT 26/08/2010
1 2
4
3
4 3
Image 3-83
Formatter: securing screws (simplified)
3. Engine replacement
1 2
41