Engine Controller Frame Assembly: Fixing Screws; Fan Unit 2: Fixing Screws; Removing Fan Unit 2 - Barco Galaxy NH-12 Installation Manual

Image 3-16
Engine controller frame assembly: fixing screws
4. Slide out the engine controller frame unit by lifting it
3.2.4

Removing fan unit 2

Overview
The fan engine top and fan engine bottom — the assembly of those two fans is called FAN unit 2.
Necessary tools
Torx screwdriver T20
How to remove fan unit 2?
1. Unplug both fan engine top and fan engine bottom:
- connector J400 on the X-fan supply (blue wire)
- connector J401 on the X-fan supply (red wire)
2. Remove the screws fixing fan unit 2
Image 3-17
Fan unit 2: fixing screws
3. Lift and tilt fan unit 2 to remove it
3.2.5 Removing the engine
Necessary tools
Torx screwdriver T20
How to remove the engine?
1. Remove both screws fixing the engine to the lens holder
R59770591 ENGINE KIT 26/08/2010
3. Engine replacement
13