Lens Holder: Two Screws Fixing The Lens Holder To The Inside Frame; Lens Holder: Screw Fixing The Lens Holder To The Outside Frame; Engine: Connectors - Barco Galaxy NH-12 Installation Manual

3. Engine replacement
Image 3-31
Lens holder: Two screws fixing the lens holder to the inside frame
Image 3-32
Lens holder: Screw fixing the lens holder to the outside frame
6. Remove the handle from the engine (if available)
7. Make the connections to the preformatter board
- 6 signal cables
2 signals cables going to the red formatter
o
2 signal cables going to the green formatter
o
2 signal cables going to the blue formatter
o
- 3 power cables
1 cable to the green formatter
o
1 cable to the red formatter
o
1 cable to the blue formatter
o
Image 3-33

Engine: connectors

8. Fix the grounding wires to the preformatter frame
20 R59770591 ENGINE KIT 26/08/2010