Lens Holder: Two Screws Fixing The Lens Holder To The Inside Frame; Lens Holder: Screw Fixing The Lens Holder To The Outside Frame - Barco Galaxy NH-12 Installation Manual

3. Engine replacement
Note: If it is not possible to install the engine in the correct way, it might be needed to first loosen the fixing screws of the lens
holder. The arrows in the images below point to the screws that fix the lens holder to the projector frame.
Image 3-27
Lens holder: Two screws fixing the lens holder to the inside frame
Image 3-28
Lens holder: Screw fixing the lens holder to the outside frame
3. Fix the engine to the projector using two screws
18 R59770591 ENGINE KIT 26/08/2010