Fan Unit 2: Fixing Screws; Installing The Fan Unit 2 - Barco Galaxy NH-12 Installation Manual

- 3 grounding wires (signal)
- grounding wires (power)
9. Install fan unit 2 (= assembly fan engine top and fan engine bottom) (see concerning chapter)
10.Install the engine controller frame assembly (see concerning chapter)
11. Install the covers (see concerning chapter):
- engine fan cover 2
- engine fan cover 1
- top cover
- rear cover
3.3.2

Installing the fan unit 2

Necessary tools
Torx screwdriver T20
How to install fan unit 2?
1. Put fan unit 2 on its correct location
2. Fix fan unit 2 using the fixing screws
Image 3-34
Fan unit 2: fixing screws
3. Connect the fans to the X-fan supply:
- connector J400 on the X-fan supply (blue wire)
- connector J401 on the X-fan supply (red wire)
4. Install the engine controller frame assembly (see concerning chapter)
5. Install the covers (see concerning chapters):
- engine fan cover 2
- engine fan cover 1
- top cover
- rear cover
3.3.3 Installing the engine controller frame assembly
Necessary tools
Torx screwdriver T20
How to install the engine controller frame assembly?
1. Slide the engine controller frame assembly into its correct position
2. Fix the assembly using the screws
R59770591 ENGINE KIT 26/08/2010
3. Engine replacement
21