Intermec PC4 Programmer's Reference Manual page 87

Remarks: Exception of output: Error 07 "Out of media or ribbon," is added after
ESim for the PC4 and PF8 Printers Programmer's Reference Manual
eR Command Parameter Descriptions (continued)
Parameter Description
p Mode of User Defined Error/Status Character
2
reply (one ASCII numerical:
p
number is NN:
Output at error action: <NAK>NN<XOFF>
Output at error recovery: <XON>
p
defined by p
Output at error action: <p
Output at error recovery: <p
p
error number NN:
Output at error action: <p
Output at error recovery: <p
p
replacement:
Like default mode (0), but with all <XOFF>
replaced by p
optional p
Output at error action: <NAK>NN<p
Output at error recovery: <p
p Optional recovery action single character:
3
The normal recovery character <XON> is
replaced by p
character, except hex 00. If no p
p
character.
07 with Pnnn or Rnnn, where nnn = number of remaining labels:
Output at error media action (mode 0):
<NAK>07Pnnn<XOFF>
Output at error ribbon action (mode 0):
<NAK>07Rnnn<XOFF>
Output at error recovery:
<XON>
= 0 Mode of Reply Default, where error
2
= 1 Mode of Reply only with character,
2
:
1
= 2 Mode of Reply with character p
2
= Mode of <XOFF> and <XON>
2
and all <XON> replaced by
1
:
3
. Value of p
3
is used instead as a recovery action
1
Chapter 4 — ESim Commands
><CRLF>
1
><CRLF>
3
and
1
>NN<CRLF>
1
>00<CRLF>
3
>
1
>NN
3
is one single ASCII
3
is available,
3
73