Intermec PC4 Programmer's Reference Manual page 72

Chapter 4 — ESim Commands
58
C- Counter Parameter Descriptions (continued)
Parameter Description
p Alphanumerical support (optional):
5
N= Numerical support. Anything other than
digit and leading spaces in DATA causes error
03.
A = Alpha support: Base 10 on digits, base 26
on letters (default).
Anything else than digit, leading spaces, and
uppercase alpha characters in DATA causes
error 03.
Wrap around:
0 ?g 9 goes back to 0.
A g Z goes back to A.
B = Alphanumerical support: Base 36
Anything other than digit, leading spaces, and
uppercase alpha characters in DATA causes
error 03.
Wrap around:
0 g 9 gA g Z g0.
9 goes to A. Z goes back to 0.
[-] A single leading minus sign in the prompt
field causes the prompt to be sent one time
only after the form is retrieved (Keyboard
display unit only, see below).
[--] A double leading minus sign in the prompt
field causes the prompt to be suppressed
(Keyboard display unit only, see below).
"PROMPT" An ASCII text field to transmit to the
Keyboard display unit or host via the serial
interface each time a form containing this
command is retrieved. It usually requests the
operator to enter the starting value for the
counter.
ESim for the PC4 and PF8 Printers Programmer's Reference Manual