Chapter 4 — ESim Commands
68
ES Command Parameter Descriptions (continued)
Parameter
Description
"data"
p3 x c1 = bit map data (in bytes). Data is
received in bytes on a line by line basis. The 0,0
cell map position is in the top left corner of
the map as viewed in the 0 degree rotation.
Repeat parameters a, b, c, and data for each
character until all characters in the set have
been downloaded.
For fonts with the rotation parameter p
02 hex (all directions), repeat the individual
font character download for each 90° rotated
character from the start of the character set
until all rotated characters in the set have been
downloaded. The number of individual
character maps downloaded is double the
characters in the font set (p
ESim for the PC4 and PF8 Printers Programmer's Reference Manual
set to
2
).
1