Intermec PC4 Programmer's Reference Manual page 56

Chapter 4 — ESim Commands
Remarks: In all bar codes, the "DATA" field can be replaced or combined with
42
Example:
This example produces a Code 39 bar code:
N
B50,50,0,3,2,6,200,B,"998152-001"
P1
Code 39 Bar Code Example
the commands below:
DATA Field Command Descriptions
Command Description
Variable:
Vnn Prints the contents of the variable "nn" at this
position, where nn is a 2 digit number from
00-99.
Consecutive
number counter:
Cn Prints the contents of counter "n" at this
position.
Cn±x
Prints the contents of counter "n" at this
position while setting the counters start value
to "x". n and x are 1 digit numbers from 0-9.
Enter + to increase the value or - to decrease
the value.
ESim for the PC4 and PF8 Printers Programmer's Reference Manual