Intermec PC4 Programmer's Reference Manual page 116

Chapter 4 — ESim Commands
Remarks: The printers have a label gap sensor designed to detect the top of each
102
.
Q Command Parameter Descriptions
Parameter Description
p Form length measured in dots.
1
203.2 dpi (8 dots/mm):
Default is 1200 dots.
Maximum without memory cartridge is 3780
dots at full print width.
Maximum with 256k SRAM cartridge is 6258
dots at full print width.
300 dpi (11.81 dots/mm):
Default is 1200 dots.
Maximum without memory cartridge is 2640
dots at full print width.
Maximum with 256k SRAM cartridge is 4364
dots at full print width.
p Gap length measured in dots.
2
203.2 dpi (8 dots/mm) at 24 dots is the
default.
300 dpi (11.81 dots/mm) at 24 dots is the
default.
±p Optional offset length measured in dots.
3
form:
• through the semi-transparent liner in the gap between labels.
• through a hole in the media.
The sensor is located slightly to the right in relation to the center of
the media path (as seen from the front of the printer). Refer to your
printer user's manual for specifications of the size and location of
detection slots.
ESim for the PC4 and PF8 Printers Programmer's Reference Manual