Intermec PC4 Programmer's Reference Manual page 41

Chapter 3 — Designing Bar Code Labels
ESim for the PC4 and PF8 Printers Programmer's Reference Manual
It is not necessary to reset the counter start value. The counter keeps
track of the last number issued as long as the power remains switched
on and the counter is updated according to instructions in the form.
Command Explanation
CR/LF to start command structure
Retrieve form
FR"TEST"
Call for variables
?
Substitute variable V00
EASYCODER
Substitute variable V01
501SA
Substitute variable V02
Dan
CR/LF to use existing counter value
Print 2 copies of a single label
P1,2
Once a form has been retrieved, you can use it over and over again
until you retrieve another form. All variable input data and counter
values are stored in the volatile memory, which means it is lost when
the printer loses power. If prompts are enabled, existing data and
counter values are displayed on the screen after the related prompt.
Any input data can be overwritten at will.
Command Explanation
? Call for variables in the same form
CR/LF to use existing data in V00
CR/LF to use existing data in V01
Sam Substitute data in variable V02
200000 Substitute counter start value
P1,1 Print 1 copy of 1 label
27