Heat & Glo ATS-AU-D Installation And Operation Instructions Manual page 12

LOG #2 (SRV327-702):
Position log #2 by locating its slot over the tab on the front left of the burner. The
slot of the left side of log #2 fi ts over the bar grate. Push the left side back onto it so it rests against the step.
LOG #3 (SRV327-703):
Position log #3 by locating its slot over the tab on the right front of the burner. The
slot on the right side of log #3 fi ts over the bar grate.
LOG #4 (SRV327-704):
Place the bottom left corner of log #4 behind log #2 and rest its top right corner
on log #1.
12 Heat & Glo • ATS-AU-D • 327-900 Rev. F • 6/09