Konica Minolta BIZHUB C250P User Manual page 39

Installation and operation precautions
No. Part Name
1 Main unit
2 Automatic Duplex Unit AD-503
3 Desk DK-502
4 Paper Feed Cabinet PC-103
5 Paper Feed Cabinet PC-203
6 Paper Feed Cabinet PC-403
7 Finisher FS-603
8 Punch Kit PK-501
9 Finisher FS-501
10 Job Separator JS-601
11 Finisher FS-514
12 Output Tray OT-601
13 Punch Kit PK-510
C250P
Description
The data sent from the computer is printed.
Referred to as the "machine", the "main unit", or
the "C250P" throughout the manual.
Turns over printed pages, allowing double-sided
pages to be printed automatically.
Required to print on letterhead paper.
Referred to as the "automatic duplex unit" through-
out the manual.
Allows this machine to be set up on the floor.
Referred to as the "desk" throughout the manual.
The top tray can be loaded with up to 500 sheets of
paper, and the bottom tray can be used as storage.
Referred to as the "single paper feed cabinet"
throughout the manual.
Both the top and bottom trays can each be loaded
with up to 500 sheets of paper.
Referred to as the "double paper feed cabinet"
throughout the manual.
Can be loaded with up to 2,500 sheets of paper
Referred to as the "LCT" throughout the manual.
Feeds out printed pages. The "Offset" setting (sep-
arating), Staple settings (stapling), and "Fold & Sta-
ple" function (binding) are available.
• In order to install the finisher, the main unit must
be installed on the desk, on the LCT, on the sin-
gle paper feed cabinet, or on the double paper
feed cabinet.
Allows hole punching to be used if installed onto
Finisher FS-603.
Finishes printed pages according to the selected
Output setting (sorting or stapling), then feeds out
the pages.
• In order to install the finisher, the main unit must
be installed on the desk, on the LCT, or on the
single paper feed cabinet or the double paper
feed cabinet.
Print exit tray installed on Finisher FS-501
Referred to as the "job separator" throughout the
manual.
Feeds out finished printed pages. The "Sort" set-
ting (separating by copy set), "Group" setting (sep-
arating by page), and Staple settings (corner
stapling and two-point stapling) are available.
Print output tray installed onto the finisher FS-514
and used for separating printed pages
Referred to as the "optional finishing tray"
throughout the manual.
Allows hole punching to be used if installed onto
finisher FS-514
1
1-20