Konica Minolta BIZHUB C250P User Manual page 298

Loading copy paper
Paper Source
Finisher FS-501
Job separator JS-601
Finisher FS-514
Output Tray OT-601
Saddle Stitcher SD-503
Mailbin Kit MT-501
Print exit tray (standard)
*1
There are five Foolscap sizes: 220 × 330 mm, 8-1/2 × 13 w, 8-1/4 × 13 w,
8-1/8 × 13-1/4 w and 8 × 13 w. Any one of these sizes can be selected. For
details, contact the technical representative.
*2
Can be used when optional punch kit is installed on Finisher.
C250P
Paper Size
Exit tray 1:
"Group"/"Sort" setting: 11 × 17 w to 5-1/2 × 8-1/2 w/v,
12-1/4 × 18 w (A3 Wide)
Exit tray 2:
"Offset/Group" setting, "Offset/Sort" setting:
11 × 17 w to 7-1/4 × 10-1/2 w/v, 12-1/4 × 18 w (A3 Wide)
"Staple" setting: 11 × 17 w to 7-1/4 × 10-1/2 w/v
11 × 17 w to 5-1/2 × 8-1/2 w
Finishing tray 1, 2 and optional Output Tray
11 × 17 w, 8-1/2 × 11 w/v, 5-1/2 × 8-1/2 w/v, 12-1/4 × 18 w (A3
wide w)
"Group"/"Sort" settings: 11 × 17 w to 8-1/2 × 11 w/v
Staple settings: 11 × 17 w to 8-1/2 × 11 w/v
*2
Punch settings :
2-hole: 11 × 17 w to 8-1/2 × 11 w/v
3-hole: 11 × 17 w, 8-1/2 × 11 v
Fold & staple: 11× 17 w, 8-1/2 × 11 w
8-1/2 × 11 v, 5-1/2 × 8-1/2 w
11 × 17 w to 5-1/2 × 8-1/2 w/v, 12-1/4 × 18 w (A3 Wide),
A3 w to B6 w, A6 w,
5
5-3