Specifying Finishing Settings; Stapling Prints (Staple Settings) - Konica Minolta BIZHUB C250P User Manual

Loading copy paper
5.3

Specifying finishing settings

If the optional finisher is installed, the machine can be set to finish the pages
after printing them.
The Finishing settings can be specified from the printer driver.

Stapling prints (Staple settings)

!
Detail
In order for the prints to be stapled, all of the following conditions must
be met.
- The paper width must be between 7-1/4 inch and 11-3/4 inch.
- The paper length must be between 7-1/4 inch and 17 inch when finisher
FS-603 is installed or between 5-3/4 inch and 17 inch when finisher FS-
514.
Prints can be fed out stapled either in the corner or at two places.
Reminder
Pages can be fed out stapled together only if a finisher is installed.
When Finisher FS-603 is installed
Paper Weight
16 lb to 24 lb
Number of Bound Pages
8-1/2 ×
11 w or
smaller
C250P
Paper Size
8-1/2 × 11 w/v
11 × 17 w, 8-1/2 × 14 w
2 sheets
3 to 5 sheets
6 to 10 sheets
11 to 20 sheets
21 to 30 sheets
31 to 50 sheets
Loading Capacity (detected with ei-
ther measurement)
1,000 sheets
500 sheets
Maximum Number of Sets
One place One place
towards the towards the
back front
100 sets 40 sets
80 sets 40 sets
60 sets 40 sets
30 sets 30 sets
30 sets 30 sets
30 sets/1,000 30 sets/1,000
sheets sheets
5
6 inch
3 inch
Two places
40 sets
40 sets
40 sets
30 sets
30 sets
30 sets/1,000
sheets
5-27