Konica Minolta BIZHUB C250P User Manual page 181

Specifying printer driver settings
Note
If the paper size is other than the custom size, select the desired settings
after specifying the settings in Custom Size.
When "W" is selected for each standard paper size in the printer driver,
the data can be centered and printed.
For example, if 8 1/2 × 11 size data is created and you want to center and
print on 11 × 17 size paper, specify "8 1/2 × 11 W" as the paper size in
the printer driver and specify "Tray 1" or "Bypass Tray" as the paper
source.
To print, load 11 × 17 paper in the tray ("Tray 1" or "Bypass Tray") that is
specified in the printer driver, and then select "Paper Tray" in the control
panel and follow the steps described below to specify the paper size for
the paper tray that is used.
Select [8 1/2 × 11 W].
Enter the 11 × 17 paper size in [Oversize Paper].
C250P
3
3-48