Konica Minolta BIZHUB C250P User Manual page 399

Troubleshooting
11
If the paper could not be
removed in step 10, turn
the misfeed-clearing dial
in the folding section
clockwise.
Feed the paper into the
exit tray 2, and then pull
it out.
12
Close the front door of
the finisher.
13
Slide the finisher back against the machine.
Reminder
If the message "Misfeed detected." appears, be sure to open the front
door, turn the misfeed-clearing dial until the removal indicator is com-
pletely blue, and then remove the paper. If the paper is pulled out with too
much force, the finisher may be damaged.
Do not pull paper remaining in the transfer unit out with too much force,
otherwise the folding unit may be damaged.
Be careful that your fingers are not pinched when the front door is closed.
For details on the positions of paper misfeeds, refer to "Paper misfeed in-
dications" on page 8-5.
C250P
Misfeed-
clearing dial in
the folding
section
8
8-34