Enabling Wi−Fi From User Home Screen - Lennox icomfort Wi?Fi T Homeowner's Manual

Enabling the thermostat's Wi-Fi feature from the Home screen
network security key or passphrase
displays information here as keys pressed
WI−FI SETTINGS
Wi−Fi
disable
7 END
1
START
HERE
1
press any line to edit it
network name (SSID)
6
press here to enter network name
password
6
press here to enter Wi−Fi AP (router) password
7 END
connect
type the network security key or passphrase for
(locked Wi−Fi Access Point [AP])
6
press here to enter Wi−Fi AP (router) password
7 END
connect
NETWORK SETTINGS
5.0
5.0 UNSECU-
RED ACCESS
POINT
5?
WI−FI SETTINGS
4
Wi−Fi
NETWORK
enable
SETTINGS
2
Figure 21. Wi−Fi setup
Page 17
Secure Connection Recommended!
5.2 none
A secure wireless network is recommended over an
open (unsecured) network. You will need your password
security
WEP
WEP
is WPA2
to enable Wi−Fi in a secured connection.
5.2
WPA
WPA Enable Wi−Fi
a
communicate with a wireless router:
WPA2
WPA2
1. Press and release the Wi−Fi symbol in the lower
left corner of the HOME screen (see START
HERE). The screen changes from the Home
Screen to the WI−FI SETTINGS screen.
2. Press the Wi−Fi enable button.
3. Press next as necessary; then press accept after
reading the User Agreement.
4. Press NETWORK SETTINGS; this screen shows
a graphical view of buttons representing Wi−Fi op-
tions OPEN and SECURE wireless networks and
5.1
a button for creating a new access point (AP).
5. Decide which of the following buttons you need to
5.2
select:
5.0 OPEN Wi−Fi Port (no password required).
5.1 SECURE create
5.1 SECURE Ports (requires router password).
new AP
Access Points
5.2 Create new AP (Access Point).
5.2a When creating a new AP, you have the op-
5.2 CREATE NEW AP
tion of selecting a security level (default is none;
choose from WEP, WPA, WPA2, depending on the
User Agreement
security defined in the homeowner's router); the
password field appears.
next...
6. When you touch in one of the input fields (press
here to enter...), the keyboard tool appears. Enter
next...
password (if simply logging into an existing net-
3
work) or enter the network name if creating a new
accept decline
AP. If you mistype the password or if you cannot
access the selected network, a message will alert
you to retry.
7. Press connect to complete the connection. Note
that Wi−Fi enable" button on the Wi−Fi SETTINGS
screen changes to Wi−Fi disable".
icomfort Wi−Fit 7−Day Programmable Communicating Thermostat
To enable the Wi−Fi feature to