Enable Wi−Fi From User Home Screen - Lennox icomfort Wi-Fi Setup Manual

Enable the thermostat's Wi-Fi feature from the Home screen
network security key or passphrase
displays information here as keys pressed
WI−FI SETTINGS
Wi−Fi
disable
7 END
1
START
HERE
Wi−Fi
1
506920−01 09/12
press any line to edit it
network name (SSID)
6
press here to enter network name
password
6
press here to enter Wi−Fi AP (router) password
7 END
connect
type the network security key or passphrase for
(locked Wi−Fi Access Point [AP])
6
press here to enter Wi−Fi AP (router) password
7 END
connect
NETWORK SETTINGS
5.0
5.0 UNSECU-
RED ACCESS
POINT
5?
WI−FI SETTINGS
4
Wi−Fi
NETWORK
enable
SETTINGS
2
Figure 27. Wi−Fi setup
Page 24
Secure Connection Recommended!
5.2 none
Make sure the router is capable of, and set to operate in
wireless network b" mode. Check router utility program or
security
WEP
WEP
is WPA2
contact service provider for help. A secure wireless net-
5.2
work is recommended over an open (unsecured) network.
WPA
WPA
a
You will need the homeowner's approval and router pass-
WPA2 word to enable Wi−Fi in a secured connection.
WPA2
Enable Wi−Fi
municate with a wireless router:
1. Press and release Wi−Fi" in the lower left corner of
2. Press the Wi−Fi enable button.
3. Press next as necessary; then press accept after
5.1 4. Press NETWORK SETTINGS; this screen shows a
5.2
5.1 SECURE
5. Decide which of the following buttons you need to
Access Points
5.2 CREATE NEW AP
User Agreement
next...
next...
3
6. When you touch in one of the input fields (press here
accept decline
7. Press connect to complete the connection. Note
To enable the Wi−Fi feature to com-
the HOME screen (see START HERE). The screen
changes from the Home Screen to the WI−FI SET-
TINGS screen.
reading the User Agreement.
graphical view of buttons representing Wi−Fi options
OPEN and SECURE wireless networks and a button
for creating a new access point (AP).
select:
5.0 OPEN Wi−Fi Port (no password required).
5.1 SECURE Ports (requires router password).
5.2 Create new AP (Access Point).
5.2a When creating a new AP, you have the option
of selecting a security level (default is none; choose
from WEP, WPA, WPA2, depending on the security
defined in the homeowner's router); the password
field appears.
to enter...), the keyboard tool appears. Enter pass-
word (if simply logging into an existing network) or
enter the network name if creating a new AP. If you
mistype the password or if you cannot access the
selected network, a message will alert you to retry.
that Wi−Fi enable" button on the Wi−Fi SETTINGS
screen changes to Wi−Fi disable".