Setting Humidity Controls - Lennox icomfort Wi?Fi T Homeowner's Manual

Setting humidity controls

NOTICE
Humidifier and dehumidifier controls must be setup by the in-
staller or these controls will not be visible. If your system has one
or both of these features and the controls are not visible, contact
your Lennox dealer for proper setup.
If the controls have been setup, they will appear and will be ON.
To adjust humidity controls (either to humidify or dehumidify), click the
button to go to the dashboard controls; then select system settings
button. Some systems may have a humidifier and some may have a de-
humidifier, while still other systems may have both (as shown in figure
20). You can control either or both from this screen.
Both controls work identically. Touch the button of the humidity control
you want to address; if it says (de)humidifier is OFF, one touch will
change it to (de)humidifier is ON and bring on the RH setting button be-
low that button. When you touch the set−to button, the arrows appear,
allowing you to change to the desired humidity setting.
506921−01 04/12
Remember that the humidify" control only operates while in the heating
mode and dehumidify" only operates while in the cooling mode.
SYSTEM SETTINGS
fan settings
set to
AUTO
9:39 am January 23, 2012
Figure 20. Humidifier controls
Page 16
humidity settings
humidifier dehumidifier
settings settings
humidity de−
humidifier
display IS humidifier
is ON
ON is ON
;when
turned on,
% the text
40 50
below will
appear
set to set to
showing
current
setting
current indoor humidity is 50%
%
?