Hd-Sdi Recording - Roland V-440HD Owner's Manual

Settings and Parameters

HD-SDI Recording

When recording the V-440HD's video output with an HD CAM deck, DVC PRO HD deck, HD non-linear editing device, or other
such equipment, it may be necessary to convert the V-440HD's component output to HD-SDI signals. For this, you will need to
obtain a separate HD HD-SDI converter to convert the component signals to HD-SDI.
V-440HD Settings Parameters
Set the following parameters from the menu. Make parameter settings suited for the particular usage environment.
Settings Parameter
1. HD/RGB Output
2. HD/RGB Input
13. System
* For more on the menus, refer to Menu Operations (p. 25).
Settings Parameters for Devices Other Than V-440HD
It may be necessary to set the following parameters for connected HD recorder.
Settings Parameter
HD HD-SDI Converters
HD Recorder
* Indications may vary with the device used.
82
HD Video Output Device RGB Video Output Device
HD Camera PC or Other Device
HD HD-SDI Converter
Component
Cable
1. Output Format (1080i) Sw,
etc.
5. Zooming
3. Pre Scaling Mode
4. Manual Pre Scaling
5. Scaling Type (RGB)
1. System Frame Rate
Values
Sync Signal: Use internal sync signal*
Frame Rate: 59.94 Hz*
Input Signal: HD-SDI signals*
Sync Signal: Use internal sync signal*
SD Video Output Device
DV Camera, Player, Etc.
BNC Cable
Selects appropriate format for the HD-SDI
converter being used.
Set to 100.
There are times when the RGB video is not
displayed fully on the screen. Set the "3. Pre
Scaling Mode" to Manual and adjust with the
"4. Manual Pre Scaling" parameter.
As RGB video features various differing as-
pect ratios, such as 4:3 and 16:9, it may be nec-
essary to adjust the aspect ratio while
observing the screen.
Select the format appropriate for the output
device you are using.
HD Video Deck (HD-SDI)
Related Page
p. 26
p. 58
p. 27
p. 59
p. 49
p. 64