Table of Contents
Advertisement
Copying Presets
Use the following procedure to copy settings from one PANEL
PRESET to another PANEL PRESET button.
1.
Press the MENU button.
The menu is displayed.
2.
Select "11. Panel Preset Edit."
3.
Press the ENTER button.
4.
Select "1. Copy."
5.
Select the preset to be copied.
The preset shown at the left of the screen becomes the copy
source.
6.
Press the ENTER button.
7.
Select the preset copy destination.
8.
Press the ENTER button.
The message "Are You Sure?" appears.
9.
Select "Yes."
10. Press the ENTER button.
The preset shown at the left of the screen is copied to the
PANEL PRESET button selected in Step 7.
Note that any settings in the copy-destination PANEL PRESET
are overwritten when this operation is executed.
Exchanging Presets
Use the following procedure to exchange settings stored in one
PANEL PRESET with settings stored at another PANEL PRESET
button.
1.
Press the MENU button.
The menu is displayed.
2.
Select "11. Panel Preset Edit."
3.
Press the ENTER button.
4.
Select "2. Exchange."
5.
Select the preset to be exchanged.
The preset shown at the left of the screen becomes the exchange
source.
6.
Press the ENTER button.
7.
Select the preset exchange destination.
8.
Press the ENTER button.
The message "Are You Sure?" appears.
9.
Select "Yes."
10. Press the ENTER button.
The preset shown at the left of the screen is exchanged with the
preset stored to the PANEL PRESET button selected in Step 6.
Inserting a Master Fade When
Switching Presets
You can have the output momentarily fade in and out between
presets when presets are switched. Use the following procedure to
make the necessary settings.
1.
Press the MENU button.
The menu appears.
2.
Select "11. Panel Preset Edit."
3.
Press the ENTER button.
4.
Select "4. Set Preset Fade Time?"
5.
Press the ENTER button.
6.
Set the Master Fade time.
Set the master Fade times in a range from 0.0 to 4.0 (seconds).
Select Parameters To Save As
Presets
If there are any parameters that you do not want to save as part of
the Presets, you can prevent them from being saved by using the
following procedure.
1.
Press the MENU button.
The menu appears.
2.
Select "11. Panel Preset Edit."
3.
Press the ENTER button.
4.
Select "3. Preset Play Select."
5.
Press the ENTER button.
6.
Select the parameter you do not want to include in the
preset.
7.
Press the ENTER button.
8.
Select "Free."
*
Select "Load" to have the parameter applied in the preset.
Other Operations
43
Advertisement
Chapters
Table of Contents
