Connections And Settings; Making The Connections - Roland V-440HD Owner's Manual

Connections and Settings

Making the Connections

921
To prevent malfunction and/or damage to TV monitors or other devices, always
turn down the volume, and turn off the power on all devices before making any
connections.
1
Before connecting the V-440HD, make sure that the power to all devices to be
connected is turned off.
2
Connect the included power cord to the V-440HD's AC inlet, then connect the
other end of the cord to a power outlet.
3
Connect the V-440HD to other devices as shown in the figure.
[V-440HD Connecting Diagram]
to power outlet
Final Output (HD)
Plasma Display or Other Display
Final Output (RGB)
Projector or Other Display
20
HD Video Output Device RGB Video Output Device
HD Camera PC or Other Device
Loop Thru
VGA Monitor
VGA Display
HD IN Monitor
Multiformat Monitor or Other Device TV Monitor or Other Device
RS-232C Device
MIDI Device
MIDI Sequencer
PC or Other Device
SD Video Output Device
DV Camcoder , Presenter
Ground terminal
SD PREVIEW Monitor
TV Monitor or Other Device
SD PGM OUT Monitor SD IN Monitor
TV Monitor or Other Device
HD/RGB IN Connectors
Make sure that the component Y, Pb,
and Pr are properly connected when
connecting component video to the
HD/RGB IN BNC connectors. If
connecting RGB video, connect R, G,
B, H, and V. Failure to connect these
properly may prevent output of the
video or result in problems with the
colors.
external ground