Button - Roland V-440HD Owner's Manual

2. HD/RGB Input
Settings for the input from the HD/RGB IN connectors are made here.
Parameters
2- 1. HD/RGB Ch A/B
2- 2. HD/RGB Ch 1
2- 3. HD/RGB Ch 2
2- 4. HD/RGB Ch 3
2- 4. HD/RGB Ch 4
HD/RGB Input Parameters
Parameters
1. Format Auto Detect
2. Input Format
3. Pre Scaling Mode
4. Manual Pre Scaling
5. Scaling Type
6. Manual X Scale
7. Manual Y Scale
8. X Position
9. Y Position
10. Brightness
11. Contrast
12. Saturation
13. Red
14. Green
15. Blue
16. Frequency
17. Phase
18. Sw Enable
19. Input Ch Reset
*1 Cannot be set in HD/RGB Channel A/B. Parameter numbers are in sequence, with these parameters omitted.
*2 Enabled when Format Auto Detect is set to Manual.
*3 Enabled when Pre Scaling Mode is set to Manual.
*4 Enabled when Scaling Type is set to Manual.
About the Input Video Aspect Ratio
The parameter "5. Scaling Type" above is initially set to "Full Scale." With this setting, the aspect ratio of the input video is
automatically adjusted to conform to the aspect ratio of the HD output or RGB output. For example, since HD video has an aspect
ratio of 16:9, input video with an aspect ratio of 4:3 (such as SD video and RGB video) is stretched from side to side. If you do not
want to have the input video aspect ratio changed, select "Fixed Aspect: Letter" or "Fixed Aspect: Crop" for "5. Scaling Type."
* For more detailed information, refer to "About the Input Video Aspect Ratio" (p. 28).
About the HD/RGB Input Format
The V-440HD inputs component and RGB video in the formats shown in the following table.
Component
480/60p
576/50p
1080/60i
* The frame rate of 59.94 is shown as 60 in the menu of this unit.
* RGB units are [horizontal (pixels) x vertical (lines) / frame rate (Hertz)].
Explanation
Sets input for SD section video input to HD/RGB
Sets video input to Channel 1 of the HD/RGB IN connectors
Sets video input to Channel 2 of the HD/RGB IN connectors
Sets video input to Channel 3 of the HD/RGB IN connectors
Sets video input to Channel 4 of the HD/RGB IN connectors
Explanation
Function automatically distinguishes input *1
Selects input format *1*2
Switches scaling adjustment function on and off
Adjusts scaling ratio when full scaling used *3
Scaling method
Adjusts the horizontal expansion ratio *4
Adjusts the vertical expansion ratio *4
Fine adjustment of the horizontal start position
Fine adjustment of the vertical start position
Brightness adjustment
Contrast adjustment
Saturation adjustment
Red adjustment
Green adjustment
Blue adjustment
Fine adjustment of the Sampling Frequency *1
Fine adjustment of the Sampling Phase *1
Selects Enable or Disable for the selected channel

button

Resets the above settings to the original factory
settings
RGB
1080/50i 640 x 480/60
720/60p 640 x 480/75
720/50p 800 x 600/60
800 x 600/75
1024 x 768/60
Menu Parameters
Values
* Refer to "HD/RGB Input Parameters."
However, content appended with *1 does
not appear.
* Refer to "HD/RGB Input Parameters."
* Refer to "HD/RGB Input Parameters."
* Refer to "HD/RGB Input Parameters."
* Refer to "HD/RGB Input Parameters."
Values
Auto, Manual
* Refer to "About the HD/RGB Input Format"
Auto, Manual
90.0–110.0%, Auto
Full Scale. Fixed Aspect: Letter, Fixed Aspect:Crop, Manual
0010%–1000%, Auto
0010%–1000%, Auto
-200– +200
-200– +200
-64– +64
-64– +64
-64– +64
-64– +64
-64– +64
-64– +64
-200– +200
-64– +64
Off, On
—
1024 x 768/75
1280 x 768/60
1280 x 768/75
1280 x 1024/60
59