Table of Contents
Advertisement
Settings and Parameters
RGB Video Live Output
In business presentations and other such situations, use the V-440HD's RGB output when outputting video to a data projector.
V-440HD Settings Parameters
Set the following parameters from the menu. Make parameter settings suited for the particular usage environment.
Settings Parameter
1. HD/RGB Output
2. HD/RGB Input
*
For more on the menus, refer to Menu Operations (p. 25).
Settings Parameters for Devices Other Than V-440HD
It may be necessary to set the following parameters for the data projector.
Settings Parameter
Output Device (e.g., data projector, computer-
use liquid crystal display)
80
HD Video Output Device
RGB Video Output Device
HD Camera
PC or Other Device
Final Output (RGB)
Projector or Other Display
1. Output Format (RGB) Sw,
etc.
5. Zooming
3. Pre Scaling Mode
4. Manual Pre Scaling
5. Scaling Type
Values
Set the input to "RGB Input."
Switch off if the screen features a 16:9 wide out-
put function.
SD Video Output Device
DV Camera, Player, Etc.
Selects optimal format, e.g., 1280 x 1024/60 to 640
x 480/60, for the connected device.
Set value to 100 or lower when entire screen is not
being displayed, adjusting as you observe the
screen being displayed.
There are times when excess video is displayed
on the screen. In such cases, Set the "3. Pre Scal-
ing Mode" to Manual and adjust with the "4.
Manual Pre Scaling" parameter.
As RGB video features various differing aspect
ratios, such as 4:3 and 16:9, it may be necessary to
adjust the aspect ratio while observing the
screen. If satisfactory results cannot be obtained
with "Full Scale," "Fixed Aspect: Letter," or
"Fixed Aspect: Crop," select "Manual" and make
fine adjustments to the "6. Manual X Scale" and
"7. Manual Y Scale" parameters.
Related Page
p. 26
p. 58
p. 27
p. 59
Advertisement
Chapters
Table of Contents
