Recording; Recording A Performance; Recording Your Performance Along With A Song - Roland V-Drums TD-27 Quick Start Manual

Recording

Recording a Performance

You can easily record your own performance and play it
back.
MEMO
You can record for up to 60 minutes if an SD card is
inserted, or up to approximately three minutes if an SD
card is not inserted. If an SD card is not inserted, you can
play back by pressing the [F5] (PREVIEW) button after
recording, but cannot save the recording to this unit.
Recording
* If you want to save (export) your recorded song to an SD
card, insert the SD card before you continue (p. 7).
Press the [ t ] button.
1.
The REC STANDBY screen appears, and TD-27 is in the
record-standby condition.
MEMO
If you want to record along with a click (metronome),
sound the click at this point (p. 15).
2.
Turn the dial to select what will be recorded.
Display Explanation
Record all sound (except for the click and
ALL
the guide track).
DRUMS ONLY Record only the sound of the drums.
Press the [ s ] button to start recording.
3.
Press the [ s ] button once again to stop
4.
recording.
Playback and saving
5.
Press the [F5] (PREVIEW) button.
The recorded performance plays back.
If you want to exit without saving the song to the SD
card, press the [F1] (DELETE) button.
6.
Press the [F4] (EXPORT) button to save the
song.
A confirmation message appears.
7.
Use the cursor buttons to select "OK," and
press the [ENTER] button.
The song is saved on the SD card.
18

Recording Your Performance Along with a Song

You can record your performance along with one of the
TD-27's built-in backing (accompaniment) songs or a song
saved on the SD card.
MEMO
If you want to record along with a song from your
smartphone connected via the MIX IN jack or via
Bluetooth, play back the song on your smartphone while
you record as described in "Recording a Performance. "
Selecting and recording a song
1.
Press the [SONG] button.
The SONG screen appears.
2.
Use the dial to select the song that you want
to record along with.
Each time you press the [F1] button, you cycle between
built-in songs (INTERNAL), audio files on the SD card
(SD CARD), and songs recorded (exported) to the SD card
(REC DATA).
* You can't record along with a built-in demo performance.
Press the [ t ] button.
3.
The REC STANDBY screen appears, and TD-27 is in the
record-standby condition.
4.
Use the dial to select "ALL" as the recording
target.
5.
Press the [F1] button and use dial to select
"with SONG."
Press the [ s ] button to start recording.
6.
TD-27 starts recording and the song starts playing.
Press the [ s ] button once again to stop
7.
recording.
Playback and saving
8.
Press the [F5] (PREVIEW) button.
The recorded performance plays back.
If you want to exit without saving the song to the SD
card, press the [F1] (DELETE) button.
9.
Press the [F4] (EXPORT) button to save the
song.
A confirmation message appears.