Switching Between Ntsc And Pal - Roland V-440HD Owner's Manual

About Computer Software Used
in Backing Up the V-440HD's
Settings
Software (for Windows XP only) for use in backing up the
V-440HD's settings is available on the Roland Systems Group
website. Download the software from the following URL.
[Roland Systems Group Website]
http://www.rolandsystemsgroup.net/
Switching Between NTSC
and PAL
You can switch the V-440HD between NTSC and PAL formats.

Switching Between NTSC and PAL

from the Menu
1.
Press the MENU button.
The menu is displayed.
2.
Select "13. System."
3.
Select "1. System Frame Rate."
4.
Select NTSC or PAL.
If using NTSC, select "60-NTSC"; select "50-PAL" if using PAL.
The V-440HD can output color bars. This is useful when making
output settings.
* For more on the menus, refer to "Menu Operations" (p. 25).
Switching to NTSC or PAL When the
Power is Turned On
NTSC and PAL are switched when the V-440HD's power is turned
on while HD/RGB button 1 and 4 are held down.
Other Operations
49