Konica Minolta bizhub C450 Fax Manual page 41

Before use
No. Name
8 [Reset] key
9 [Interrupt] key
10 [SUB POWER] button
11 [Stop] key
12 [Start] key
13 Main power indicator
14 Data indicator
15 [Proof Copy] key
16 Keypad
17 [C] (clear) key
18 [Mode Check] key
19 [Utility/Counter] key
20 [Mode Memory] key
21 Contrast dial
22 [Enlarge Display] key
23 [Accessibility] key
C450
Description
Press to clear all settings (except programmed set-
tings) entered in the control panel and touch panel.
Copy screen is displayed after scanning original doc-
uments. Then It change to the interrupt mode. While
the machine is in interrupt mode, the indicator on the
[Interrupt] key lights up in green and the message
"Now in interrupt mode." appears on the touch panel.
To cancel interrupt mode, press the [Interrupt] key
again.
Pressed to turn on/off machine operations, for exam-
ple, for copying, printing or scanning. When turned off,
the machine enters a state where it conserves energy.
Press to stop the operation that is selected box mode,
fax mode, scan mode or copy mode.
While in fax mode, press the [Stop] key during fax
transmission to stop the fax transmission.
Press to start the operation that is selected box mode,
fax mode, scan mode or copy mode. While in fax
mode, fax transmission is started.
When this machine is ready to begin operation, the in-
dicator on the [Start] key lights up in green. If the indi-
cator on the [Start] key lights up in orange, operation
cannot begin.
Press to restart a stopped job. For details on jobs, re-
fer to "User's guide – Copy operations".
Lights up in green when the machine is turned on with
the [Main power] button
Flashes in green while a print job is being received.
Lights up in green when data is being printed.
Not used for fax mode.
Use to type in the number. It can be used at the time
of registration of a fax number and data.
Use to type in the number of copies, zoom ratio, vari-
ous settings.
Press to erase a value (such as the fax number,
number of copies, a zoom ratio, or a size) entered us-
ing the keypad.
Press to display screens showing the specified set-
tings.
Press to display the utility mode screen. It can be used
in case of utilities operation or confirming the number
of copies, fax communication or scanning.
Not used for fax mode.
Use to adjust the contrast of the touch panel.
Not used for fax mode.
Press to display the screen for specifying user acces-
sibility functions.
2
2-5