Replacing A Imaging Unit - Konica Minolta Bizhub C20P User Manual

Replacing a Imaging Unit

When replacing a imaging unit, refer to the following table. For optimum print
quality and performance, use only approved KONICA MINOLTA imaging units
for your specific printer type, as listed in the table below. You can find your
printer type and the imaging unit part numbers on the consumables reorder
label inside the front cover your printer.
Printer
Type
AM
EU
Note
Do not touch the OPC drum
surface. This could lower image
quality.
If
I-UNIT LOW
to , the message
ON
toner) appears when a imaging unit becomes near empty. Follow the steps
below to replace the imaging unit.
You are advised to replace the indicated imaging unit when the mes-
sage
1
Check the message window to see which color imaging unit needs replac-
ing.
Replacing Consumables
Printer Parts Imaging Unit Type
Number
Imaging Unit - Black (K)
Imaging Unit - Yellow (Y)
A00F 014
Imaging Unit - Magenta (M)
Imaging Unit - Cyan (C)
Imaging Unit - Black (K)
Imaging Unit - Yellow (Y)
A00F 024
Imaging Unit - Magenta (M)
Imaging Unit - Cyan (C)
on the
SYS DEFAULT MENU/ENABLE WARNING
I-UNIT LOW X
I-UNIT LIFE X
Y
(where " ". represents the color of the
X
appears.
Imaging Unit
Parts Number
A031 00G
A031 05G
A031 0AG
A031 0GG
A031 00J
A031 05J
A031 0AJ
A031 0GJ
is set
135