Konica Minolta Bizhub C20P User Manual page 227

This message...
I-UNIT END
REPLACE
X
I-UNIT MISSING
CHECK X
TONER OUT
REPLACE X
TONER MISSING
CHECK X
TRAY X EMPTY
"SIZE"
"MEDIA"
TRAY X PAPER ERR
"SIZE"
"MEDIA"
TRAY X SIZE ERR
ADD
"SIZE"
Status, Error, and Service Messages
means...
The X Imaging unit
has completely
reached the end of its
life.
The X imaging unit is
not installed, or an
unapproved imaging
unit is installed.
The X toner cartridge
is completely empty.
The X toner cartridge
is not installed, or an
unapproved toner
cartridge is installed.
The X (Tray 1, 2 or 3)
was specified with the
printer driver for print-
ing, but Tray X is
empty. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to
OFF
The media size/type
set in the printer
driver is different from
the size/type of media
loaded. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to
OFF
The media size set in
the printer driver is
different from the size
of media loaded.
do this...
Replace the Imaging
unit.
Install a correct KONICA
MINOLTA imaging unit.
Replace the toner car-
tridge.
Install a correct KONICA
MINOLTA toner car-
tridge.
Load the correct media
into the specified tray.
.
Load the correct media
size and type.
.
Load the correct media
size into the specified
tray.
213