Status, Error, and Service Messages
Status, error, and service messages are displayed in the control panel mes-
sage window. They provide information about your printer and help you locate
many problems. When the condition associated with a displayed message
has changed, the message is cleared from the window.
Standard Status Messages
This message...
CALIBRATING
CANCELLING JOB
COPYING
ENERGY SAVER
FIRMWARE UPDATE
INITIALIZING
PRINTING
PROCESSING
READY
Status, Error, and Service Messages
means...
After replacing a toner car-
tridge or a imaging unit, or
after rebooting your printer
after environmental
changes, your printer auto-
matically pauses to do an
Auto-Image Density Control
(AIDC) cycle. This process
is provided to make reliable
printer operation with opti-
mum output quality possible.
The job is being cancelled.
The printer is printing with
the collating function.
The printer is in Energy
Saver mode to reduce
power consumption during
periods of inactivity. When a
print job is received, the
printer returns to normal
power within 30 seconds.
The firmware is being
updated.
The printer is being initial-
ized.
The printer is printing.
The printer is processing
data.
The printer is on and ready
to receive data.
do this...
No action needed.
205